Ricoh RDC-5300 Spezifikationen PDF herunterladen (Seite 125)

123

Miscellaneous

5

Dead batteries

Auto power-off activated

Obstruction between the remote

control unit and camera sensor

Dirty remote control transmitter or

camera sensor

Dead remote control batteries

Area captured by autofocus field

and the surrounding area have

contrasting light levels or the

entire subject is dark.

Phenomenon occurring with

pictures of bright subjects, known

as the smudge phenomenon

Display shut off Replace batteries.

Slide power on again.

Remove the obstruction. (Sensor is on

the left side of the lens.)

Clean with a soft dry cloth.

Replace CR2032 lithium batteries.

There is no malfunction.

There is no malfunction. Never shoot the

Sun, etc.

Remote control

unit will not

work

LCD monitor

brightness

changes during

autofocus

operation

Vertical lines

appear on

image

Wrong type of SmartMedia

memory card

SmartMedia memory card

incorrectly oriented

Dead batteries

Camera malfunction

Date and time setting is incorrect

Battery removed

Camera not set to erase mode

Write protect pad on SmartMedia

memory card

File protected

Power switch off or auto power-

off activated.

Batteries have been removed

Auto power-off setting is disabled

Camera powered by AC adapter

(auto power-off is automatically

disabled when powered by an AC

adapter)

Beep disabled

The video I/O switch is set on

[IN].

The television system setting is

incorrect.

The output video gear has an

incorrect video I/O switch setting.

SmartMedia

memory card

will not fit into

slot

Use a SmartMedia memory card specified

for the camera.

Insert the SmartMedia memory card the

correct way.

Replace batteries.

Slide the power off and on once. Turn the

mode dial to [

] or [ ]. If the problem

persists, (1) reset the camera by sliding

the power switch after removing the main

batteries, and (2) reinstall the batteries

and try to operate the camera again.

Reset the date and time.

The date setting is reset if the battery has

been removed for about 3 minutes or

longer. Set the date again.

Turn the mode dial to [

].

Remove pad from SmartMedia memory

card.

Use the play menu to reset the file’s

protection setting.

Slide power on and retry.

Reset mode.

Enable setting.

–

Set beep sound to [ON] on the SETUP

menu.

Set video I/O switch is set on [OUT].

Select the correct television system.

Check to see if the output video gear has

a correct video I/O switch setting.

■ Miscellaneous

Camera will not

operate even

when buttons

and switches

are

manipulated

Date and time

are wrong

Date and time

were set but

disappeared

File won’t erase

or SmartMedia

memory card

won’t format

Mode settings

have changed

Auto power-off

will not activate

Beep will not

sound

Problem Cause Solution Page

Problem Cause Solution Page

27

41

–

–

–

–

–

32

32

27

–

35

35

94

31

83, 91

103

102

103

–

102

77

107

–

No image on

the TV screen

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 133 134

Kommentare zu diesen Handbüchern

Keine Kommentare