Ricoh Caplio RR30 Bedienungsanleitung PDF herunterladen (Seite 149)

149

Appendix

About connecting to your computer/software

Symptom Cause Measure

Cannot download

images

Connect your camera via

the USB hub to your

computer.

1. Your camera may not be recognized correctly if you connect to the

USB Port of your computer via a USB hub. Connect it directly to the

USB port of your computer.

Cannot download

images

(Only for Windows98/

98SE/Me)

The COM Port setting is

wrong.

1. Connect your camera to the computer with the USB cable. Open

[System] from inside the [Control Panel], then open the [Device

Manager] in the [System Properties] dialog box.

2. Click the [+] on the left side of [Port COM/LPT] to open, specify

[Ricoh Camera Port] and click [Properties].

3. Click the [Port Select] tab.

4. Select a COM Number not being used from [PortName].The port

currently allocated for your camera is indicated by a "*".

Immediately after installing the USB driver, COM 7 should be

selected, so select a number above COM8.

Cannot download

images

(For all Windows

OS's)

The computer is not

recognizing the camera

correctly.

1. Connect your camera to the computer with the USB cable. Click

[Start] on the Windows task bar.

2. Select [Settings], open [System] from inside the [Control Panel],

then open the [Device Manager] in the [System Properties] dialog

box.

⁄

If using the Windows2000/XP, click the [Hardware] tab then click the [Device

Manager] button.

3. Click the [+] on the left side of [Other Devices] and make sure there

is not a [Digital Camera] below it. If there is, click the [Delete(E:)]

button to delete it.

Select [Caplio RR30 Software] from [Add/Remove Applications] of

the [Control Panel], click the [Add/Remove] button and then install

the software.

4. Turn off your camera and computer.

5. Turn your computer back on and reinstall the software from the CD-

ROM. (At this time, do not connect the camera.)

Next, connect the camera to the computer with the USB cable.

When the computer recognizes the camera, the [New Hardware]

screen launches and your camera is registered by the computer.

Cannot download

images

(For Windows98/

98SE/Me)

The computer is not

recognizing the camera

correctly.

1. Connect your camera and computer with the USB cable. Click

[Start] on the Windows task bar.

2. Select [Settings], open [System] from inside the [Control Panel],

then open the [Device Manager] in the [System Properties] dialog

box.

3. Click the [+] on the left side of [Port COM/LPT] to open, and click

whether or not there is an Unknown Device symbol (!) indicated for

[Ricoh Camera Port]. Alternately, check if there is an Unknown

Device symbol (!) indicated for [RICOH USB Virtual COM] under

[Universal Serial Controller]. If there is, click the [Delete(E:)] button

to delete it.

4. Select [Caplio RR30 Software] from [Add/Remove Programs] of the

[Control Panel], click the [Add/Remove] button and then install the

software.

5. Turn off your camera and computer.

6. Turn your computer back on and reinstall the software from the CD-

ROM. (At this time, do not connect your camera.)

Next, connect the camera to the computer with the USB cable.

When the computer recognizes the camera, the [New Hardware]

screen launches and your camera is registered by the computer.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 155 156

Kommentare zu diesen Handbüchern

Keine Kommentare

Ricoh Caplio RR30 Bedienungsanleitung Seite 149

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kameras Ricoh Caplio RR30