Ricoh Container Stacker Bedienungsanleitung PDF herunterladen (Seite 11)

1-6 Container Stacker Installation Instructions

6. Romove the tape from the leveling bolts, take out the four wooden spacers from

the accessory box, and place them at the bottom of the bolts (under the plastic

bag).

7. Using an open-end wrench, raise the container stacker by rotating the leveling

bolts.

8. Remove the 4 pieces of base packing.

9. Turn all the casters in the same direction.

10. Install the ramps (two on each side) under the incline board.

Wood spacer

Leveling bolt

Down

Ramp

Incline Board

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 48 49

Keine Kommentare

Ricoh Container Stacker Bedienungsanleitung Seite 11