Ricoh SP 200N Installationsanleitung PDF herunterladen (Seite 12)

6. Enter the MAC and IP addresses, and then click [OK].

To specify these in an IPv6 environment, click [Cancel], and then proceed to Step 8.

CTT191

MAC address

Enter the MAC address shown on the network setting list.

IP address

Enter the user's IP address.

The computer's IP address can be ascertained using Command Prompt.

To display the IP address, open Command Prompt, enter "ipconfig", and then press the

[Enter] key.

Enter the IP address of the computer being used with the variable part in the IP address

modified.

Subnet mask, Default gateway address

Specify the subnet mask and default gateway address as required in accordance with the

network environment.

7. If the procedure completes successfully, click [OK].

If the procedure fails, click [OK] to return to the window displayed in Step 6. Try specifying

the setting again. If the problem persists, see "Troubleshooting" to check whether there is a

problem with the connection or some other issue, or contact your service representative.

8. Select [Add a new printer], and then click [Next>].

9. Select the printer detection method, and then click [Next>].

To search for printers automatically, select [Search for printers automatically].

To search for a printer by its IP address, select [Search for printers by specified IP Ad-

dress].

To select a port or specify a new port, select [Select a port or specify a new port]. If a

dialog box for selecting the port type appears, it is recommended to select the standard

TCP/IP port.

10. Follow the instructions in the installation wizard.

•

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Ricoh SP 200N Installationsanleitung Seite 12