Ricoh SP 213w Betriebsanweisung PDF herunterladen (Seite 18)

Using the Web Image Monitor

Web Image Monitor is a device-monitoring tool which allows you to configure the machine set-

tings using the Web browser of a computer on the same network.

If DHCP is enabled, specify the wireless LAN settings over a wired connection, and then rees-•

tablish the connection using the wireless IP address.

Connect the network cable to the Ethernet port.

Plug the other end of the cable into a network device, such as a hub.

Launch the Web browser.

In the Web browser's address bar, enter "http://(machine’s IP address)/" to access the

machine.

Click [Network Settings].

Click [Wireless] tab.

Set [Wireless] to [Active].

Click [Scan List] to display the list, select the destination SSID, and then click [OK].

If you cannot find the destination SSID, configure the SSID according to the following pro-

cedure.

1. In [SSID], enter the SSID for the access point (router).

Set [Communication Mode] to [Infrastructure].

In [Authentication], select the authentication method.

In [Encryption], select the encryption option.

If the authentication method is set to [Open System], set the encryption option to [None] •

or [WEP].

If the authentication method is set to [Shared Key], set the encryption option to [WEP].•

If the authentication method is set to [WPA2-PSK], set the encryption option to [CCMP •

(AES)].

If the authentication method is set to [Mixed Mode WPA/WPA2], set the encryption option •

to [TKIP/AES].

If the encryption method is set to [None] ◆

If you have selected [None], proceed to Step .

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Keine Kommentare

Ricoh SP 213w Betriebsanweisung Seite 18