
Making Printer Settings with the Control Panel
142
6
E
EE
E
Press {
{{
{Enter #}
}}
}.
One of the following messages appears on the panel display.
Note
❒ If "WL.LAN Signal" is not displayed, "IEEE 802.11b" has not been selected
for "LAN Type" in "Network Setup" of the Host Interface menu. Select
"IEEE 802.11b" for "LAN Type", and then check the "WL.LAN Signal" in
the Maintenance menu again.
❒ If "Ad hoc" in "Comm. Mode" of "IEEE 802.11b" in the Host Interface menu
is selected, you cannot check the signal. Select "Infrastructure" and then
check it again.
❒ Every time you press {
{{
{Enter #}
}}
}, the signal is updated.
❒ The signal is indicated as "Good" if the signal strength is 86-100%, "Fair" if
the strength is 61-85%, "Poor" if the strength is 31-60%, and "Unavailable"
if the strength is 0-30%. If the signal is unstable or unavailable, remove ob-
stacles or move the printer to a place where the signal can be received.
❒ Using wireless devices or microwave sources near the printer might affect
the signal.
F
FF
F
Press {
{{
{Escape}
}}
}.
WL.LAN Signal
Good 100%
WL.LAN Signal
Fair 70%
WL.LAN Signal
Poor 40%
WL.LAN Signal
Unavailable 18%
Kommentare zu diesen Handbüchern