Ricoh ISO1 Betreibershandbuch PDF herunterladen (Seite 20)

SETTING UP THE SCANNER

1-6

Plug one end of the shielded high

density 50-pin SCSI II cable

(ANSI-compliant*1) into the SCSI

II port located on the back of the

scanner.

If you do not plan to connect

anything to the other port, cap it

with a terminator*2.

Plug the other end of the SCSI

cable into the host computer or

other peripheral.

*1 SCSI Cables

There are a variety of different SCSI connector types, including the high-density

50-pin connector, the D-sub 25-pin connector, and the 50-pin flat connector.

Both of the SCSI ports of this scanner require high-density 50-pin connectors.

When choosing a SCSI cable, get one that has a high-density 50-pin connector

on one end (to connect to the scanner), and a connector that meets the needs

of the port of your computer or the device you are connecting to. Also make sure

that the SCSI cable you use is ANSI-compliant.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 79 80

Keine Kommentare

Ricoh ISO1 Betreibershandbuch Seite 20