Ricoh ISO1 Betreibershandbuch Seite 24

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 80
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 23
SETTING UP THE SCANNER
1-10
CONNECTING THE POWER CORD
Use only the power cord that comes with the scanner to connect it to a power
source.
Note the following important points when connecting the power cord.
Use only the power cord supplied with the scanner.
Connect the power cord to the scanner and plug it into a wall outlet before
turning on the power switch.
The plug is equipped with a grounding pin, and must be plugged into a
grounded outlet.
To connect the power cord
1
Make sure that scanner power is
turned off.
2
Attach the power cord to the
power cord socket on the back of
the scanner.
3
Plug the other end of the power
cord into a standard grounded
wall outlet.
Seitenansicht 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare