Ricoh AP400 Betriebsanleitung PDF herunterladen (Seite 83)

Error & Status Messages on the Control Panel

77

5

Hardware Problem

Option RAM

An error has occurred in the

optional Memory Unit.

First, turn the power switch

off and then on. If the message

appears again, call your sales

or service representative.

Turn off the power switch, Re-

place the Memory Unit, and

then turn on the power

switch. See "Memory Unit Type

C (SDRAM Module)" in the

Setup Guide.

Turn off the power switch, re-

move the Memory Unit, and

then turn on the power

switch.

Note

❒ If you remove the Memory

Unit, you must set up the

option with the printer

driver. If you are using

Windows 95/98/Me, Win-

dows 2000/Windows

XP/Server 2003 and Win-

dows NT 4.0, see "Install-

ing the Printer Driver and

Software" in the Setup

Guide.

❒ In this case, you might not

be able to print complex

print jobs.

Hardware Problem

Parallel I/F

An error has occurred in the

parallel I/F.

If you use the parallel I/F, re-

place the interface cable that

caused the error. If the mes-

sage appears again, contact

your sales or service represen-

tative.

Hardware Problem

USB

There is a problem related to

the Universal Serial Bus Con-

nection and Hardware.

First, turn the power switch

off and then on, If the message

appears again, call your sales

or service representative.

Hardware Problem

Wireless Board

An error has occurred in the

802.11b Interface Unit.

Reset the 802.11b Interface

Unit if the same message ap-

pears after turning the power

off and then back on again. If

the same message still ap-

pears, contact your sales or

service representative.

Messages/Second messages Description Solution

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 211 212

Kommentare zu diesen Handbüchern

Keine Kommentare