Ricoh AP400 Betriebsanleitung Seite 88

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 212
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 87
Troubleshooting
82
5
RPCS Graphic Error The graphics is not initialized
because the graphics memory
was not reserved.This error
rarely occurs unless the print-
er detects the memory failure.
Please note that
RPCS(RICOH printer lan-
guage) is the same worldwide
and does not need to be trans-
lated.
Replace the installed memory.
RPCS Syntax Error The printer identified a syntax
error. This error results from;
data transmogrification
caused by the transmission
path problem, data interrup-
tion, data transmission from
other drivers, etc.
Be sure to use the correct driv-
er.
RPCS Memory Overflow The printer memory is not ini-
tialized because the CDC
memory was not reserved via
the system call. This error
rarely occurs.
Replace the installed memory.
SC XXX-X
/Power Off On
If Error Reoccur
Call Service
An error has occurred. First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
SC2001 An error has occurred in the
resident font RAM.
First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Toner is Almost
Empty
The toner is almost run out. Prepare a new toner cartridge.
If the Image Density gets too
light, replace the toner car-
tridge with a new one. See
p.107 Replacing the Toner
Cartridge.
Waiting... The printer is waiting for the
next print job.
Wait for a while.
Warming Up... The printer is warming up or
toner is being supplied.
Wait until the panel display
change the "Ready".
Messages/Second messages Description Solution
Seitenansicht 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 211 212

Kommentare zu diesen Handbüchern

Keine Kommentare