Ricoh G112 Betriebsanleitung Seite 149

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 299
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 148
Making Printer Settings Using the Control Panel
149
When DHCP is set to on, the subnet mask cannot be changed. To
change it, set DHCP to off. Contact your network administrator for infor-
mation about the network configuration.
Default: 000.000.000.000
Gateway Address
You can specify the gateway address.
When DHCP is set to on, the gateway address cannot be changed. To
change it, set DHCP to off. Contact your network administrator for infor-
mation about the network configuration.
Default: 000.000.000.000
Frame Type (NW)
You can select the frame type for NetWare.
Auto Select
Ethernet ll
Ethernet 802.2
Ethernet 802.3
Ethernet SNAP
Default: Auto Select
Active Protocol
You can select the active protocol.
•TCP/IP
•NetWare
•SMB
•AppleTalk
Default: All Active
Ethernet Speed
You can select the network speed to operate the printer.
Auto Select
10Mbps Half D.
10Mbps Full D.
Seitenansicht 148
1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 298 299

Kommentare zu diesen Handbüchern

Keine Kommentare