Ricoh Type 480 Bedienungsanleitung PDF herunterladen (Seite 101)

JOB EDITOR

can use all formats, also ISO B, C. However you have

to place the drawing in the "2portrait" position.

Original: In the "Original" format setting the program

obtains the format size from the original drawing file. This is

the preset.

If you use the "Window" format setting, you can freely adjust

the format width and height values, whereby the format size

is given by the window value. The freely adjustable settings

apply both to the orientation as well as the format size and

the format border:

X-Scaling Format width

Y-Scaling Format height

Percent: If you want to scale the drawing set the format to

"Percent". In this case, the "Scale" input fields are activated

and you can enter any values between 1.0 and 999.0.

If you choose one of the standard ISO, ANSI or ARC formats,

you can accept the dimensions or change them as you

require:

Format: First set the required format. You can now alter the

format width ("X-scaling") and the format height ("Y-scaling")

values as you wish. If the entered values are not

corresponding with the standard formats, the menu entry will

change to "window".

The value x in the "Maintain ratio" window represents the

side proportions "width = x · height ". If you activate the

"Maintain ratio" option, you can only alter the values above it

for the width, i.e. the X-scaling. The Y-scaling, or height is

then adjusted automatically, i.e. the drawing is scaled

proportionally. This can be useful e.g. if you know that the

printout of a drawing is too large for the paper size

available. In this case, activate the "Maintain ratio" option

and reduce the value x slightly, to obtain a proportionally

correct printout. The "Maintain ratio" option is already

activated as a standard setting.

• Scaling:

The X-Scaling input fields only become active, if you have

selected "Percent" as the format. You can print out the

RW-480 PLOTBASE 101

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 233 234

Keine Kommentare

Ricoh Type 480 Bedienungsanleitung Seite 101