Ricoh Type 480 Bedienungsanleitung PDF herunterladen (Seite 174)

SCAN

"Automatic length detection" feature (see above). In this case,

the "DY" box (format height) is deactivated.

• Preview:

If you have activated this option, you can follow the scan

result on the monitor parallely to the scanning. If this option

is deactivated, the scan result is only displayed when the

scanning is completely finished. In case of very long

drawings we recommend to deactivate this option before

scanning.

• Mirror:

The drawing is mirrored horizontally about the x-axis. You

will usually need these settings if the drawing is scanned and

saved on the wrong side. This is primarily of significance if a

translucent medium has been scanned in on the "wrong" side

(back to front), to increase the contrast.

• Invert:

The colors black and white are swapped.

• Remove textures:

If you use this option you can remove textures in a scanned

drawing.

• Output:

You have two possibilities for the output of your originals on

the plotter RW-480: Upper, Rear and Rear Hold.

• Scan mode:

There are several scanning modes are available, which

should be tested before using:

The "Text" mode should be used for black & white drawings.

The "Photo" mode is used for documents with photographs or

graphics with complex shading. The more "Lines per inch"

are shown, the more differentiated the simulated image of

RW-480 PLOTBASE 174

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 233 234

Keine Kommentare

Ricoh Type 480 Bedienungsanleitung Seite 174