Ricoh Type 480 Bedienungsanleitung PDF herunterladen (Seite 132)

JOB EDITOR

Attention: If you enter a larger value, you will obtain

a s m a l l e r drawing: The entry 1 equates to 0.125 %.

Example: if you enter 801, the drawing is reduced to

99.875 %.

• Pattern style:

Three types of patterns are defined for Calcomp drawings, in

which the "Pattern" command is used.

"Round" means that a certain colored area is filled with a

certain number of filled circles, which are given a certain

arrangement on the area, to achieve an intended color

saturation.

In "Random" on the other hand a percentage of color

saturation is determined for the same colored area, which is

then converted into the necessary number of pixels, which

are randomly arranged over the area to achieve the

intended color saturation.

Which is why that when circle patterns are overlapped, the

covered areas can not be as clearly identified as if two

random patterns are overlapped. The recommended default

setting is therefore "random", because you can achieve the

best results.

As the "round" setting has been installed as a standard to

date, this option has been retained of you do not see the

need to print the same drawings differently in future.

Finally, you can also select the grey value pattern "symmetric

pattern". As the name suggests, the "symmetric pattern"

produces a symmetrical grey value pattern. Try and see

which pattern produces the best printing results for your

graphic. Try and see which pattern produces the best

printing results.

• Synchronization

Synchronization is used to check the completeness of the

Calcomp—files, which have been sent from the application

program. Four pieces of information are used for the

synchronization settings:

RW-480 PLOTBASE 132

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 233 234

Keine Kommentare

Ricoh Type 480 Bedienungsanleitung Seite 132