
Send Scan Settings
63
3
❖
❖❖
❖ Wait Time for Additional Scanning (WSM)
When “Show options after each scan job” is selected for [End of Scan Option],
enter the time during the time the setting menu appears. Specify the time in
seconds within the range of 3 through 900. When the specified time elapses,
the initial screen displayed immediately after power-on appears on the con-
trol panel of this machine and files will be sent.
Note
❒ This setting can only be configured using the Web Status Monitor.
❖
❖❖
❖ Scanned Sheet Counter
This item displays the number of scanned sheets, on ADF and the exposure
glass of a scanner respectively.
❖
❖❖
❖ Scanned Page Counter
This item displays the number of scanned pages, on ADF and the exposure
glass of a scanner respectively.
❖
❖❖
❖ ADF Pad Counter
This item is disabled in this machine.
❖
❖❖
❖ ADF Pick Roller Counter
This item is disabled in this machine.
❖
❖❖
❖ Select Title (WSM)
This item lets you select the titles that are displayed when you press the {
{{
{./*}
}}
}
(Title) key. You can select between “Alphabet” and “Custom Title”.
Note
❒ This setting can only be configured using the Web Status Monitor.
❒ Before using “Custom Title”, it is necessary to register custom titles using
the Web Status Monitor, and restart this machine.
❖
❖❖
❖ Time Zone (WSM)
This item lets you specify your local time zone, by selecting the time offset
from GMT (Greenwich Mean Time).
❖
❖❖
❖ Double Feed Detect (WSM)
This item lets you specify to avoid a double feed of the originals on a scanner,
by selecting from; Off, Ultrasonic Wave, Length, and Ultrasonic
Wave+Length.
❖
❖❖
❖ Length Difference (WSM)
This item lets you specify to avoid a mis-feed of the originals on a scanner, by
setting a certain length of an original with differences of; +/-10 mm, +/-15
mm, and +/-20 mm.
Kommentare zu diesen Handbüchern