
Using Wireless LAN
177
11
Using Wireless LAN
This section describes the setting procedures related to a network when the op-
tional “802.11b Interface Unit Type A” is used.
Preparation
Prepare a 10BASE-T or 100BASE-TX cross network cable beforehand. When
you use a network device as a hub, prepare a 10BASE-T or 100BASE-TX
straight network cable.
Outline to Use Wireless LAN
You can configure the settings for a wireless LAN card using [Configuration] →
[Basic Settings] → [TCP/IP] on the Web Status Monitor. Before getting started, it is
necessary to prepare for logging in the Web Status Monitor.
Make preparations to log in to the web status monitor.
Connect this machine and a computer using a network cable temporarily
Sample setting for this machine:
IP Address : 192.168.1.2
Subnet Mask :
255.255.255.0
Sample setting for the computer:
IP Address : 192.168.1.3
Subnet Mask :
255.255.255.0
Use the Web Status Monitor to configure the wireless LAN settings.
Kommentare zu diesen Handbüchern