Ricoh Remote Communication Gate S Installationsanleitung PDF herunterladen (Seite 57)

Initial Discovery Settings

Remote Communication Gate S can scan the network for printers, and it can also scan computers for devices

connected via USB. This process is called "discovery". Discovered devices are automatically registered in

Remote Communication Gate S. In order to discover printers, you must configure the discovery settings.

Select search target device

1. On the [Discovery Settings] screen under [Select search target device], select whether to

search for network or local (USB) printers.

2. Enter the authentication information based on your selection for [Select search target

device].

• If you selected [Network device], enter the user name and password used to connect to network

printers.

• If you selected [Local device], enter the user name and password of the Windows domain

administrator.

Protocol

1. Select the protocol to use when connecting to and gathering information from printers.

2. Configure the settings based on the protocol you selected:

• <SNMPv1,v2>

If you have selected [SNMPv1,v2] or [SNMPv3 priority], enter the read and write community

names, which are used to read and write information when using the SNMPv1 or SNMPv2

protocols.

• <SNMPv3>

If you have selected [SNMPv3] or [SNMPv3 priority], enter the user name and password for

accessing printers using the SNMPv3 protocol. Then, select whether to use the MD5 or SHA1

algorithm for authentication. Enter the encryption password and MIB context.

3. Select whether to automatically set the trap function for printers.

Search range

1. Select the search method to use for printer discovery.

2. Specify the IP address range or subnet to search within for new printers.

• [Manual entry]

Manually input the IP address ranges or subnets to search within.

Initial Settings Wizard

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 415 416

Keine Kommentare

Ricoh Remote Communication Gate S Installationsanleitung Seite 57