Ricoh Remote Communication Gate S Installationsanleitung PDF herunterladen (Seite 72)

Setting Explanation

Polling interval time for other

information

Specify the frequency at which Remote Communication Gate S polls

devices for other status information. Enter a number and select [min.],

[hour(s)], or [day(s)] from the menu.

The time you specify here is the time that will elapse between polling.

• Default: 6 hours

•

Valid values: 1 min. - 7 days

Interval between collection of

internal and administrator

counters

Specify the frequency at which Remote Communication Gate S polls

devices

for the collection of internal and administrator counters. Enter a

number and select [min.], [hour(s)], or [day(s)] from the menu.

The time you specify here is the time that will elapse between polling.

• Default: 1 day

•

Valid values: 1 min: - 7 days

Polling timeout: Enter the number of seconds to wait for a response from a device.

the machine receives no response when polling a device, it continues

attempting polling for a specified period. Polling is cancelled after this

period.

• Default: 3 sec.

•

Valid values: 0.5 - 60 sec.

• Periodic

polling cannot retrieve the following information from devices that are in energy saving mode:

• Log transfer settings

• SSL settings

• Transmission counter figures (Send/TX Total B&W Counter, Send/TX Total Color Counter, Fax

Transmission Counter, Scanner Send B&W Counter, and Scanner Send Color Counter)

• To retrieve the latest information from a device, first select the device on the Printer Management

screen. Then, on the [Printer] menu, select [Refresh Selected Device]; or, on the [Printer] menu on the

Printer Properties screen, select [Refresh Device].

3. Settings

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 415 416

Keine Kommentare

Ricoh Remote Communication Gate S Installationsanleitung Seite 72