Ricoh Remote Communication Gate S Installationsanleitung PDF herunterladen (Seite 63)

100

101

Setting Explanation

Authentication type: Select an authentication method.

[None]

Authentication is not applied.

[POP3]

Authentication is through the POP3 server.

[SMTP]

Authentication is through the SMTP server specified in [SMTP

server:].

• Default: [None]

POP3 server: Enter the IP address or host name of the POP3 server that will provide

authentication.

POP3 port No.: Enter the port number to use when communicating with the POP3 server.

Authentication account: Enter the user name for authentication with the POP3 server.

Authentication password: Enter the password for authentication with the POP3 server.

Email address for SMTP server

connection test:

Enter an e-mail address. A test e-mail will be sent to the address to

confirm that the SMTP server settings are correct.

SMTP server connection test: Click [Perform]. A test e-mail will be sent to the e-mail address specified

in [Email address for SMTP server connection test:].

• The

[POP3 server:] and [POP3 port No.:] settings can be specified/changed only if [POP3] is selected

in [Authentication type:].

• The [Authentication account:] and [Authentication password:] settings can be specified/changed only

if [POP3] or [SMTP] is selected in [Authentication type:].

Category Settings

You can configure the group categories and groups that are displayed on the [Directory] tab. After you

create groups, you can register devices to them in order to simplify device management. You can also

create

a floor map for each group, from which you can visually confirm the status and location of printers

in a group.

System Settings

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 415 416

Kommentare zu diesen Handbüchern

Keine Kommentare

Ricoh Remote Communication Gate S Installationsanleitung Seite 63

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Ricoh Remote Communication Gate S